SealBio-1 automated sealer is a device for rapid and continuous sealing of microplates. It can be adapted to ANSI, SBS standard 12-well, 24-well, 48-well, 96-well and 384-well plates with height range of 3~62 mm, including all kinds of PCR plates, ELISA plates, deepwell plates, cell culture plates, etc., as well as the sealing film of 5 mL and 10 mL cartridges used for Allsheng Auto-Pure 20B and 24D. It supports the use of 78 mm puncturable roll film, aluminum foil roll film and strong heat sealing roll film. Suitable for pre-filled of biochemical reagents, sealing film before PCR assays, long-term storage of samples, and other experimental applications that require sealing of reagents.
Suitable consumables: deepwell plates, microplates, PCR plates, Auto-Pure 20B, 24D suitable cartridges, etc.
Feature:
▪RT.~200 °C free setting, to meet the needs of different film sealing applications.
▪Built-in independent air source, no need to connect other equipment.
▪Automatic preloading of film, continuous operation.
▪Sealing cycle time<20 sec.
▪Touch screen operation, graphical interface is easier to use.
▪Standard roll film protection cover to avoid film surface contamination.
▪Program storage function to save different types of film parameters for quick recall.
Spec:
| Product name | SealBio-1 automated plate heat sealer |
| Supported plates | ANSI / SBS standard plate, height range 3~62 mm |
| Support roll film-film type | Puncturable film / aluminum foil film / strong heat sealing film |
| Support roll film-film width | 78 mm |
| Support roll film-loading method | Automatic preloading of roll film |
| Film sealing temperature-temperature range | RT.~200 °C |
| Film sealing temperature-temperature control accuracy | ±1 °C |
| Film sealing temperature-accommodative amplitude | 1 °C |
| Pre-heating time | 5 min |
| Cycle time | <20 seconds / time |
| Adjustable film sealing time-time range | 0.5~9.9 seconds |
| Adjustable film sealing time-accommodative amplitude | 0.1 seconds |
| Air source method | Built-in air source |
| Port | 1×USB-B port and 1×Ethernet port |
| Power supply | AC 110 V / 220 V, 50 / 60 Hz |
| Maximum power | 300 W |
| Software operation | 7-inch touch screen software (resolution 1024*600) / edit sealing scheme / prestored sealing scheme |
| Safety | Standby function (low power mode) / detection of plate / detection of roll film |